Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the intermediate drive shaft bracket if equipped. Refer to Front Wheel Drive Intermediate Shaft Bracket Replacement .
3. Remove the right wheel drive shaft if intermediate shaft is not equipped. Refer to Front Wheel Drive Shaft Replacement - Right Side

1

Right Front Wheel Drive Shaft Oil Seal

Procedure

1. For seal removal use DT-7004 slide hammer with DT-586 seal remover.
2. For seal installation use DT-8092 driver handle with DT-47790 seal installer.

Special Tools

For equivalent regional tools, refer to Special Tools .