To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Fuel Rail Installation

Caution: 

   • Use care when servicing the fuel system components, especially the fuel injector electrical connectors, the fuel injector tips, and the injector O-rings. Plug the inlet and the outlet ports of the fuel rail in order to prevent contamination.
   • Do not use compressed air to clean the fuel rail assembly as this may damage the fuel rail components.
   • Do not immerse the fuel rail assembly in a solvent bath in order to prevent damage to the fuel rail assembly.


    2027822
  1. Install the fuel rail (2).
  2. Install the 2 fuel rail nuts (3)
  3. Install 4 NEW fuel injection fuel rail tubes (1).

    4. 2027823

    Note: Counter hold the injector tube connector (2) and tighten the fuel rail tube to injector nut (1).

  4. Tighten the fuel rail tube nuts (1) to:
    5. • Fuel injectors 27 N·m (20 lb ft)
    • Fuel rail 20 N·m (15 lb ft)
   


© Copyright Chevrolet. All rights reserved