Cruze

Rear Side Door Outside Handle Rod Adjustment

1. Remove the rear door water deflector as needed. Refer to Rear Side Door Water Deflector Replacement .
2. Use a flat-bladed tool to open the clip on the threaded rod connecting the lock to the outside handle.
3. Adjust the travel of the handle by removing the threaded rod from the clip.

1. Position the outside door handle rod (2) in the clip (1) to eliminate any free play in the outside door handle.
2. Close the clip cover over the threaded outside door handle rod.
3. Inspect the door lock system for proper operation.
4. Install the rear door water deflector. Refer to Rear Side Door Water Deflector Replacement .