To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Front Wheel Drive Intermediate Shaft Replacement


2027930

Callout

Component Name

Preliminary Procedure

Remove the wheel drive shaft. Refer to Front Wheel Drive Shaft Replacement - Right Side .

1

Front Wheel Drive Intermediate Shaft Bearing Bolt (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tip
Use care when removing the intermediate drive shaft from the transmission as not to damage the seal.

Tighten
22 N·m (16 lb ft)

2

Front Wheel Drive Intermediate Shaft

Tip
The DT-6332 protector must be installed into the differential output shaft seal prior to removing and installing the intermediate shaft. Failure to install the DT-6332 protector may cause splines of the intermediate shaft to cut the differential output seal.

Special Tools

DT-6332 Seal Protector

For equivalent regional tools, refer to Special Tools .

   


© Copyright Chevrolet. All rights reserved