Cruze

Floor Air Outlet Replacement

1. Remove the instrument panel assembly. Refer to Instrument Panel Assembly Replacement .



2. Remove the instrument panel wiring harness (2) from the instrument panel tie bar (1).

Disconnect the electrical connectors.




3. Remove the instrument panel tie bar (2).

•	Remove the 4 instrument panel tie bar bolts (3, 4).

•	Remove the 2 instrument panel tie bar nuts (1).

4. Remove the heater wiring harness.



5. Remove the floor air outlet (2).

Remove the 6 floor air outlet bolts (1).

Caution: Refer to Fastener Caution in the Preface section.

1. Install the floor air outlet (2).

Install the 6 floor air outlet bolts (1) and tighten to 2.5 N·m (23 lb in).

2. Install the heater wiring harness.



3. Install the instrument panel tie bar (2).

•	Install the 4 instrument panel tie bar bolts (3, 4) and tighten to 22 N·m (17 lb ft).

•	Install the 2 instrument panel tie bar nuts (1) and tighten to 9 N·m (80 lb in).




4. Attach the instrument panel wiring harness (2) to the instrument panel tie bar (1).

Connect the electrical connectors.

5. Install the instrument panel assembly. Refer to Instrument Panel Assembly Replacement .