Warning: With a pressurised cooling system, the coolant temperature in the radiator can be considerably higher than the boiling point of the solution at atmospheric pressure. Removal of the surge tank cap, while the cooling system is hot and under high pressure, causes the solution to boil instantaneously with explosive force. This will cause the solution to spew out over the engine, the wings, and the person removing the cap. Serious bodily injury may result.

Preliminary Procedure

Drain the cooling system. Refer to Cooling System Draining and Filling .

1

Radiator Inlet Hose

Procedure

Reposition the 2 radiator hose clamps, using the GE-38185 pliers

Special Tools

GE-38185 Hose Clamp Pliers

For equivalent regional tools, refer to Special Tools .