Cruze

Alternator, Air Conditioning Compressor, and Power Steering Pump Belt Replacement

Special Tools

1. Remove the front compartment insulator. Refer to Front Compartment Insulator Replacement .



2. Install the EN-48253 remover (3) onto the tensioner and rotate the drive belt tensioner clockwise.
3. Rotate the drive belt tensioner fully and simultaneously insert EN-48952 holder (2) into the drive belt tensioner pin hole.
4. Remove the drive belt.

1. Install the drive belt (1).



2. Install the EN-48253 remover (3).
3. Rotate the drive belt tensioner (1) clockwise fully and simultaneously remove EN-48952 holder (2) out of the drive belt tensioner pin hole.
4. Install the front compartment insulator. Refer to Front Compartment Insulator Replacement .