To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Fuel Injection Pump Installation

Caution: 

   • Use care when servicing the fuel system components, especially the fuel injector electrical connectors, the fuel injector tips, and the injector O-rings. Plug the inlet and the outlet ports of the fuel rail in order to prevent contamination.
   • Do not use compressed air to clean the fuel rail assembly as this may damage the fuel rail components.
   • Do not immerse the fuel rail assembly in a solvent bath in order to prevent damage to the fuel rail assembly.


    2027826

    Note: Do not blow air with an air gun onto injection pump. If contaminated, wipe clean with an oilpaper.

  1. Install the fuel pump (1).

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the 3 fuel pump bolts (2) and tighten to 30 N·m (23 lb ft).
   


© Copyright Chevrolet. All rights reserved