Cruze

Exhaust Pressure Sensor Replacement

1. Open bonnet.



2. Remove the 2 clamps (2, 5).

Note: Mark the position from the hoses for installation.

3. Remove the 2 hoses (3, 4).
4. Remove the 2 exhaust pressure sensor bolts (6).
5. Remove the exhaust pressure sensor (1).

1. Install the exhaust pressure sensor (1).

Caution: Refer to Fastener Caution in the Preface section.

2. Install the 2 exhaust pressure sensor bolts (6) and tighten to 10 N·m (89 lb in).

Note: Examine the right installation position.

3. Install the 2 hoses (3, 4).
4. Install the 2 clamps (2, 5).
5. Close bonnet.