Preliminary Procedure

Remove the front bumper fascia opening cover. Refer to Front Bumper Fascia Opening Lower Cover Replacement .

1

Front Wheelhouse Liner Bolt (Qty: 8)

Caution : Refer to Fastener Caution in the Preface section.

Tighten
2.5 N·m (23 lb in)

2

Front Bumper Fascia Bolt (Qty: 2)

Tighten
9 N·m (80 lb in)

3

Front Bumper Fascia Retainer (Qty: 4)

4

Front Bumper Fascia Lower Stiffener Bolt (Qty: 3)

Tip
Only loosen the bolts.

Tighten
2.5 N·m (23 lb in)

5

Front Bumper Fascia

Procedure

1. Unclip from front bumper fascia guides.
2. Pull forward to remove the front bumper fascia.
3. Disconnect any electrical connectors.
4. Transfer parts as needed.