To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Air Cleaner Assembly Replacement

Removal Procedure
  1. Open the bonnet.

    2. 2027620
  2. Disconnect the inlet air temperature sensor wiring harness plug (1).
  3. Remove the air cleaner outlet duct from the air cleaner housing. Refer to Air Cleaner Outlet Duct Replacement .

    4. 2027600
  4. Remove the air cleaner assembly (1).
    5. • Unclip the air cleaner inlet duct
    • Unclip the fluid reservoir hose

Installation Procedure

    2027600
  1. Install the air cleaner assembly (1).
    2. • Clip in the fluid reservoir hose
    • Clip in the air cleaner inlet duct
  2. Install the air cleaner outlet duct to the air cleaner housing. Refer to Air Cleaner Outlet Duct Replacement .

    3. 2027620
  3. Connect the inlet air temperature sensor wiring harness plug (1).
  4. Close the bonnet.
   


© Copyright Chevrolet. All rights reserved