Cruze

Camshaft Installation

Special Tools

EN-422 Installer

For equivalent regional tools, Refer to Special Tools : 1.6L LXT .

1. Install NEW camshaft seal rings, using EN-422 installer .




Note: Coat with MoS2 lubricating paste. Refer to Adhesives, Fluids, Lubricants, and Sealers .

2. Install the inlet camshaft.

Note: Note the identification marking on the camshaft bearing caps.

3. Install the 5 inlet camshaft bearing caps.

Caution: Refer to Fastener Caution in the Preface section.

4. Install the 10 inlet camshaft bearing cap bolts and tighten in a spiral from the inside to the outside to 16 N·m (12 lb ft).




Note: Coat with MoS2 lubricating paste. Refer to Adhesives, Fluids, Lubricants, and Sealers .

5. Install the exhaust camshaft.

Note: Note the identification marking on the camshaft bearing cover.

6. Install the 5 exhaust camshaft bearing caps.
7. Install the 10 exhaust camshaft bearing cap bolts and tighten in a spiral from the inside to the outside to 16 N·m (12 lb ft).