Cruze

Engine Flywheel Installation

Special Tools

For equivalent regional tools, Refer to Special Tools : 1.6L LXT .

1. Clean the threads in the crankshaft.



2. Install the flywheel (2).
3. Install the EN-652 holder (1).

Caution: Refer to Fastener Caution in the Preface section.

Caution: Refer to Torque-to-Yield Fastener Caution in the Preface section.




4. Install the 6 NEW flywheel bolts (1, 2) and tighten the bolts in 3 passes, using the EN-45059 meter :

•	First pass to 35 N·m (26 lb ft)

•	Second pass to additional 30°.

•	Third pass to an additional 15°.

5. Remove the EN-652 holder.