To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Transmission Case Removal

Table 1: Transmission Case Bolt Removal
Table 2: Transmission Case Bolts from Transmission Housing Removal
Table 3: Transmission Case from Clutch and Differential Housing Removal

Transmission Case Bolt Removal
2188835

Transmission Case Bolt Removal

Callout

Component Name

1

Transmission Case Bolts (Qty: 8)

Transmission Case Bolts from Transmission Housing Removal
2188836

Transmission Case Bolts from Transmission Housing Removal

Callout

Component Name

1

Transmission Case Bolts (Qty: 12)

Transmission Case from Clutch and Differential Housing Removal
2188837

Transmission Case from Clutch and Differential Housing Removal

Callout

Component Name

1

Transmission Case

Procedure

  1. Install the DT-48231 input and output shaft pusher/puller to the transmission case.
  2. Tighten the four bolts of the DT-48231 input and output shaft pusher/puller.
  3. Screw the two spindles into the input shaft and the output shaft.
  4. Hold the spindles using a suitable tool.
  5. Turn the two nuts in direction of arrows.
  6. Unscrew the two spindles.
  7. Remove the DT-48231 input and output shaft pusher/puller.

Special Tools

DT-48231 Input and Output Shaft Pusher/Puller

   


© Copyright Chevrolet. All rights reserved