Service Information

Cruze

Input Shaft, Intermediate Shaft, Main Shaft, and Selector Fork Removal

Table 1:	Input Shaft Synchroniser Body Protector Installation
Table 2:	Input Shaft, Intermediate Shaft, Main Shaft, and Selector Fork Removal

Callout	Component Name
1	DT-48232 Input Shaft Synchroniser Body Protector Tip This prevents the 3rd and 4th synchroniser body assembly falling apart. Special Tools DT-48232 Input Shaft Synchroniser Body Protector
2	Old Input Shaft Bearing Retainer

Callout

Component Name

DT-48232 Input Shaft Synchroniser Body Protector

Tip
This prevents the 3rd and 4th synchroniser body assembly falling apart.

DT-48232 Input Shaft Synchroniser Body Protector

Old Input Shaft Bearing Retainer

Callout	Component Name
1	Input Shaft and Output Shaft Assembly Procedure Hold the input shaft and output shaft assembly firmly. Remove with the respective selector forks. Knock intermediate shaft out of intermediate shaft bearing using the DT-48186 intermediate shaft remover. Remove the DT-48232 intermediate shaft remover and the input shaft bearing retainer. Special Tools DT-48186 Intermediate Shaft Remover

Callout

Component Name

Input Shaft and Output Shaft Assembly

Hold the input shaft and output shaft assembly firmly.
Remove with the respective selector forks.
Knock intermediate shaft out of intermediate shaft bearing using the DT-48186 intermediate shaft remover.
Remove the DT-48232 intermediate shaft remover and the input shaft bearing retainer.

DT-48186 Intermediate Shaft Remover