To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Input and Main Shaft Bearing Retainer Installation


2188856

Callout

Component Name

1

Input Shaft Bearing Retainer and Output Shaft Bearing Retainer

Caution: Refer to Fastener Caution in the Preface section.

Procedure

  1. Shift the transmission into 4th and 5th gear using a screwdriver in an upwards direction.
  2. Install new retainers (Qty: 2) while holding the transmission into 4th and 5th gear in an upwards direction.

Tighten
120-130 N·m (89-96 lb ft)

2

Main Shaft Bearing Oil Slinger

Tip

    • The oil slinger installs in one direction.
    • Ensure the oil slinger is completely seated in the gear shafts.
   


© Copyright Chevrolet. All rights reserved