Cruze

Engine Oil Pressure Indicator Switch Replacement

1. Raise the vehicle full height. Refer to Lifting and Jacking the Vehicle
2. Remove the front compartment splash shield. Refer to Front Compartment Splash Shield Replacement




Note: Prevent the engine oil pressure indicator switch (1) for contamination with dirt.

3. Disconnect the engine oil pressure indicator switch wiring harness plug (3).
4. Remove the engine oil pressure indicator switch (1).
5. Remove the engine oil pressure indicator switch gasket (2).

1. Install a NEW the engine oil pressure indicator switch gasket (2).

Caution: Refer to Fastener Caution in the Preface section.

2. Install the engine oil pressure indicator switch (1) and tighten to 30 N·m (23 lb ft).
3. Connect the engine oil pressure indicator switch wiring harness plug (3).
4. Install the front compartment splash shield. Refer to Front Compartment Splash Shield Replacement
5. Lower the vehicle full height.