Cruze

Fuel Rail Installation

Note: Coat the seal rings with lubricant.

1. Install NEW injector seal rings.

Note: Inspect the installation position and ensure correct fitting.

2. Install the 4 injectors (2) to the fuel injection fuel rail (1).
3. Install 4 retaining clamps (3).




Note: Be careful while Installing. Do not damage the injectors and injector seal rings.

4. Install the fuel injection fuel rail (2).

Caution: Refer to Fastener Caution in the Preface section.

5. Install the 2 fuel injection fuel rail bolts (1) and tighten to 25 N·m (18 lb ft).



6. Install the intake manifold bracket (3).
7. Install the 2 intake manifold bracket nuts (2) and tighten to 25 N·m (18 lb ft).
8. Install the 2 intake manifold bracket bolts (1) and tighten to 25 N·m (18 lb ft).