To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Automatic Transmission Flex Plate Installation

Special Tools

EN-652 Automatic Transmission Flex Plate Holder

For equivalent regional tools, Refer to Special Tools : 1.6L LXT .

  1. Clean the automatic transmission flex plate bolt threads.

    2. 2188985
  2. Install the automatic transmission flex plate (2).
  3. Install the EN-652 holder (1) to hold the automatic transmission flex plate (2).

    4. Caution: Refer to Fastener Caution in the Preface section.

    Caution: Refer to Torque-to-Yield Fastener Caution in the Preface section.


    2188984
  4. Install the 6 NEW automatic transmission flex plate bolts (2) and tighten the bolts to 60 N·m (44 lb ft).
  5. Remove the EN-652 holder.
   


© Copyright Chevrolet. All rights reserved