Cruze

Hydraulic Valve clearance Adjuster Replacement

Special Tool

EN 845 Suction Device

For equivalent regional tools, refer to Special Tools : 1.6L LXT .

1. Open bonnet.
2. Remove the camshafts. Refer to Camshaft Replacement .




Note: Mark the assignments.

3. Remove the 16 hydraulic valve clearance adjuster (1) use the EN 845 Suction Device.
4. Prevent the hydraulic valve clearance adjuster for contamination with dirt.

Note: 

•	Observe the correct assignment.

•	Coat the sliding surfaces with NEW engine oil.

1. Install the 16 hydraulic valve clearance adjuster (1) use the EN 845 suction device.
2. Install the camshafts. Refer to Camshaft Replacement .
3. Close the bonnet.