Preliminary Procedures

1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
2. Remove the instrument panel compartment. Refer to Instrument Panel Compartment Replacement .
3. Remove the floor air outlet duct - left side. Refer to Floor Air Outlet Duct Replacement - Left Side : Right Hand Drive → Left Hand Drive .
4. Remove the radio cooling duct. Refer to Radio Cooling Duct Replacement : Right Hand Drive → Left Hand Drive .

1

Temperature Valve Actuator Bolt (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

2

Temperature Valve Actuator

Procedure

1. Disconnect the electrical connector.
2. For recalibration of the temperature valve actuator, refer to Actuator Recalibration .