Note: Mark the installation position of the connecting rod bearing caps. The connecting rod bearings and bearing caps must not be interchanged with other connecting rods.
Remove the 4 connecting rod bearing cap bolts (1) of cylinder 2 and 3.
Remove the 2 connecting rod bearing caps (2) and the 2 connecting rod bearings of cylinder 2 and 3.
Rotate the crankshaft 180°.
Remove the 4 connecting rod bearing cap bolts (1) of cylinder 1 and 4.
Remove the 2 connecting rod bearing caps (2) and the 2 connecting rod bearings of cylinder 1 and 4.
Remove the 4 pistons (1) and connecting rods (2) and the 4 upper connecting rod bearings (3) from the cylinder block.
