To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Drive Belt Installation

Special Tools

    • EN-955-2 Locking Pin
    • EN-48488 Holding Spanner

For equivalent regional tools, refer to Special Tools .

    Note: Ensure that the drive belt tensioner is held with EN-955-2 locking pin .

  1. Install the drive belt.

    2. 2191736
  2. Move the drive belt tensioner clockwise until EN-955-2 locking pin (2) can be removed. Use EN-48488 wrench (1).
  3. Remove EN-955-2 locking pin (2) from the drive belt tensioner while holding with EN-48488 spanner (1).
  4. Release tension from drive belt tensioner and remove EN-48488 wrench (1) .
   


© Copyright Chevrolet. All rights reserved