Cruze

Engine Mount Replacement - Right Side

1. Open the bonnet.
2. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement : 1.4L LUH and LUJ .



3. Install an engine lifter (1) to the right engine lift bracket and apply tension to the engine lifter chain in order to support the engine.



4. Remove and DISCARD the 3 engine mount to engine mount bracket bolts (3) and the 3 washers (4).
5. Remove the 2 engine mounts to body bolts (2) and the engine mount nut (1).
6. Remove the engine mount (5).

1. Install the engine mount (5).
2. Install the 2 engine mounts to body bolts (2).
3. Install the engine mount nut (1).
4. Install the 3 NEW engine mount to engine mount bracket bolts (3) and the 3 washers (4).

Caution: Refer to Fastener Caution in the Preface section.

Caution: Refer to Torque-to-Yield Fastener Caution in the Preface section.

5. Tighten the 2 engine mount to body bolts (2) and the engine mount nut (1) to  62 N·m (46 lb ft).
6. Tighten the 3 engine mount to engine mount bracket bolts (3) to  50 N·m (37 lb ft) + 60-70°.
7. Remove the engine lifter from right engine lift bracket.
8. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement : 1.4L LUH and LUJ .
9. Close the bonnet.