To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Clutch Actuator Cylinder Replacement - F40-6

Removal Procedure
  1. Remove transmission. Refer to Transmission Replacement .

    2. 2191457
  2. Remove swivel nut (1) from clutch actuator cylinder.

    3. 2191458
  3. Remove 3 clutch actuator cylinder bolts (3).
  4. Remove clutch actuator cylinder (1).

    5. Note: Discard clutch actuator cylinder seal.

  5. Remove clutch actuator cylinder seal (2).

Installation Procedure
  1. Clean 3 clutch actuator cylinder threads in clutch housing.

    2. 2191458
  2. Install NEW clutch actuator cylinder seal (2).
  3. Install clutch actuator cylinder (1).

    4. Caution: Refer to Fastener Caution in the Preface section.

  4. Install 3 NEW clutch actuator cylinder bolts (3) and tighten to 5 N·m (44 lb in).

    5. 2191457
  5. Install swivel nut (1) to clutch actuator cylinder and tighten to 14 N·m (124 lb in).
  6. Install transmission. Refer to Transmission Replacement .
   


© Copyright Chevrolet. All rights reserved