To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Clutch Actuator Cylinder Replacement - M32-6

Removal Procedure
  1. Remove transmission. Refer to Transmission Replacement : 1.8L 2H0 → 1.4L LUJ or 1.6L LLU .

    2. 2191455
  2. Remove clutch actuator cylinder pipe elbow (2) and clutch actuator cylinder pipe sleeve (1).

    3. 2191456
  3. Remove 3 clutch actuator cylinder bolts (2).
  4. Remove clutch actuator cylinder (1).

    5. Note: Discard clutch actuator cylinder seal.

  5. Remove clutch actuator cylinder seal (3).

Installation Procedure
  1. Clean 3 clutch actuator cylinder threads in clutch housing.

    2. 2191456
  2. Install NEW clutch actuator cylinder seal (3).
  3. Install clutch actuator cylinder (1).

    4. Caution: Refer to Fastener Caution in the Preface section.

  4. Install 3 NEW clutch actuator cylinder bolts (2) and tighten to 6 N·m (53 lb in).

    5. 2191455
  5. Install clutch actuator cylinder pipe sleeve (1) and clutch actuator cylinder pipe elbow (2).
  6. Install transmission. Refer to Transmission Replacement : 1.8L 2H0 → 1.4L LUJ or 1.6L LLU .
   


© Copyright Chevrolet. All rights reserved