Cruze

Inlet Manifold Assemble - 1.4L LUH and LUJ

1. Install the evaporative emission canister purge solenoid valve (3).
2. Install the 2 manifold absolute pressure sensors (2).
3. Install the 2 manifold absolute pressure sensor bolts (1) and tighten.



4. Install the fuel injection fuel rail assembly (3).

Caution: Refer to Fastener Caution in the Preface section.

5. Install the 2 fuel injection rail bolts (2) and tighten to 8 N·m (71 lb in).
6. Install the fuel injection rail ground cable nut (1) and tighten.
7. Install a NEW intake manifold gasket (4).