Cruze

Engine Flywheel Installation - 1.4L LUH and LUJ

Special Tools

For equivalent regional tools, refer to Special Tools .

1. Install the engine flywheel (1).
2. Install the 6 NEW engine flywheel bolts (2).



3. Install EN-652 holder (1) to hold the engine flywheel (2).

Caution: Refer to Fastener Caution in the Preface section.

Caution: Refer to Torque-to-Yield Fastener Caution in the Preface section.

4. Tighten the 6 engine flywheel bolts in a cross sequence to 60 N·m (44 lb ft).

4.1.	Tighten the 6 engine flywheel bolts in a cross sequence to an additional 45°.Use EN-470-B wrench .

4.2.	Tighten the 6 engine flywheel bolts in a cross sequence to an additional 15°.Use EN-470-B wrench .

5. Remove EN-652 holder.