Cruze

Throttle Body Assembly Replacement - 1.4L LUH and LUJ

1. Open the bonnet.



2. Disconnect the throttle body wiring harness plug (1).
3. Remove the charge air cooler outlet air hose from the throttle body. Refer to Charge Air Cooler Outlet Air Hose Replacement : Manual Gearbox .



4. Remove the 4 throttle body bolts (3).
5. Remove the throttle body (2) along with the throttle body seal ring (1).

1. Install the throttle body (2) along with a NEW throttle body seal ring (1).

Caution: Refer to Fastener Caution in the Preface section.

2. Install the 4 throttle body bolts (3) and tighten to 8 N·m (71 lb in).
3. Install the charge air cooler outlet air hose to the throttle body. Refer to Charge Air Cooler Outlet Air Hose Replacement : Manual Gearbox .



4. Connect the throttle body wiring harness plug (1).
5. Close the bonnet.