Cruze

Crankshaft Rear Oil Seal Replacement - Manual Gearbox

Special Tools

For equivalent regional tools, refer to Special Tools .

1. Open the bonnet.
2. Remove the engine flywheel. Refer to Engine Flywheel Replacement : 1.4L LUH and LUJ .
3. Place collecting basin underneath.
4. Remove the crankshaft rear oil seal.

1. Install the crankshaft rear oil seal (1) with EN-235-6 installer (2).



2. Use EN-658-1 installer (1) to strike the crankshaft rear oil seal.
3. Remove collecting basin.
4. Install the engine flywheel. Refer to Engine Flywheel Replacement : 1.4L LUH and LUJ .
5. Close the bonnet.