Cruze

Fuel Feed Pipe Replacement

Warning: Refer to Petrol/Petrol Vapours Warning in the Preface section.

1. Open the bonnet.
2. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
3. Relieve the fuel pressure. Refer to Fuel Pressure Relief .



4. Disconnect the fuel feed pipe connector (3) from fuel injector rail. Refer to Plastic Collar Quick Connect Fitting Service .
5. Unclip the fuel feed pipe (1) from the retainer clip (4).
6. Close the fuel feed pipe connector with a suitable cap.
7. Unclip the fuel feed pipe from the bulk head retainer clip (2).
8. Remove the drivetrain and front suspension frame. Refer to Drivetrain and Front Suspension Frame Replacement .



9. Open the 4 fuel pipe clips (2).
10. Remove the fuel feed pipe (1) from lower bulkhead and underbody.



11. Disconnect the fuel tank feed pipe connector (1) from the fuel feed pipe. Refer to Plastic Collar Quick Connect Fitting Service .
12. Close the fuel feed pipe and fuel tank feed pipe with suitable caps.
13. Disconnect the fuel pressure sensor wiring harness plug (2).
14. Open the rear fuel pipe clip and remove the fuel feed pipe.

1. Remove the caps from fuel feed tank pipe and fuel feed pipe.



2. Install the fuel feed pipe and secure with the rear fuel pipe clip.
3. Connect the fuel tank feed pipe connector (1) to the fuel feed pipe. Refer to Plastic Collar Quick Connect Fitting Service .
4. Connect the fuel pressure sensor wiring harness plug (2).



5. Install the fuel feed pipe (1) to lower bulkhead and underbody.
6. Close the 4 fuel pipe clips (2).
7. Install the drivetrain and front suspension frame. Refer to Drivetrain and Front Suspension Frame Replacement .



8. Clip the fuel feed pipe to the bulk head retainer clip (2).
9. Clip the fuel feed pipe (1) to the retainer clip (4).
10. Connect the fuel feed pipe connector (3) to the fuel injector rail. Refer to Plastic Collar Quick Connect Fitting Service .
11. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
12. Close the bonnet.