Preliminary Procedures

Remove the rear compartment lid inner panel trim. Refer to Rear Compartment Lid Inner Panel Trim Replacement .

1

Rear Compartment Lid Applique Assembly Nut (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten:
7 N·m (62 lb in)

2

Rear Compartment Lid Applique Clip (Qty: 2)

Tip
Depress the clip fingers and push outward in order to remove the rear applique.

3

Rear Compartment Lid Applique Assembly

Procedure

1. Disconnect the electrical connector.
2. Disengage the electrical harness grommet from the rear compartment inner panel.
3. Remove the applique assembly from the rear compartment lid.
4. Transfer parts as needed to the new applique.