To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Mass Airflow Sensor with Inlet Air Temperature Sensor Replacement

Removal Procedure

    2512532
  1. Disconnect the mass airflow sensor wiring harness plug (3).
  2. Loosen the 2 mass airflow sensor clamps (1).
  3. Remove the mass airflow sensor (5) from the air filter outlet front duct (4) and from the air filter assembly (2).

Installation Procedure

    2512532
  1. Install the mass airflow sensor (5) to the air filter assembly (2) and to the air filter outlet front duct (4).

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the 2 mass airflow sensor clamps (1) and tighten.
  3. Connect the mass airflow sensor wiring harness plug (3).
   


© Copyright Chevrolet. All rights reserved