Cruze

Turbocharger Oil Feed Pipe Replacement

1. Remove the engine sight shield. Refer to Engine Sight Shield Replacement .
2. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
3. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
4. Remove the turbocharger coolant return pipe from the turbocharger. Refer to Turbocharger Coolant Return Pipe Replacement : 2.0L Diesel LNP → 1.4L LUH and LUJ .



5. Open the retainer clamp (1).
6. Unclip the power steering fluid reservoir outlet hose (2) from the clamp (1) and the bracket (3).
7. Hang the power steering fluid reservoir outlet hose (2) aside.



8. Unclip the exhaust temperature sensor wiring harness plug (4) from the turbocharger oil feed pipe bracket.
9. Remove the turbocharger oil feed pipe bracket bolt (5) from the engine front cover.
10. Remove the 2 banjo bolts (1) from the oil filter assembly and turbocharger.
11. Remove the turbocharger oil feed pipe (3).
12. Remove the 2 turbocharger oil feed pipe gaskets (2).

1. Install the turbocharger oil feed pipe (3) with 2 NEW gaskets (2).

Caution: Refer to Fastener Caution in the Preface section.

2. Install both banjo bolts (1) to the turbocharger oil feed pipe (3) and tighten to 32 N·m (24 lb ft).
3. Install the turbocharger oil feed pipe bracket bolt (5) and tighten to 10 N·m (89 lb in).
4. Clip in the exhaust temperature sensor wiring harness plug (4) to the turbocharger oil feed pipe bracket.



5. Install the power steering fluid reservoir outlet hose (2) to the clamp (1) and the bracket (3).
6. Close the retainer clamp (1).
7. Install the turbocharger coolant return pipe to the turbocharger. Refer to Turbocharger Coolant Return Pipe Replacement : 2.0L Diesel LNP → 1.4L LUH and LUJ .
8. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
9. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
10. Install the engine sight shield. Refer to Engine Sight Shield Replacement .