Cruze

Turbocharger Coolant Return Pipe Installation

1. Install the turbocharger coolant return rear pipe (2).

Caution: Refer to Fastener Caution in the Preface section.

2. Install the 2 bolts (3) to the turbocharger coolant return rear pipe brackets and tighten to 10 N·m (89 lb in).
3. Install the 2 clamps (1, 4) to the turbocharger coolant return rear pipe (2).



4. Install the turbocharger coolant return front pipe (2).
5. Install the banjo bolt (3) to the turbocharger coolant return front pipe (2) and a NEW gasket and tighten to 32 N·m (24 lb ft).
6. Install the clamp (1) to the turbocharger coolant return front pipe (2).