Cruze

Ignition Lock Cylinder Replacement

1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
2. Remove the steering column lower trim cover. Refer to Steering Column Lower Trim Cover Replacement .



3. Insert the key into the ignition lock cylinder and turn the key to the RUN position.



4. Depress the retainer through the lock housing access hole (1) with a small Allen wrench or similar pick-type tool.
5. Remove the ignition lock cylinder from the lock housing.

1. If you are installing a new ignition lock cylinder, code the lock cylinder. Refer to Key and Lock Cylinder Coding .



2. Turn the key to the RUN position and insert ignition lock cylinder into the lock housing.
3. Turn the key to the LOCK position and remove the key from the ignition lock cylinder.
4. Install the steering column lower trim cover. Refer to Steering Column Lower Trim Cover Replacement .
5. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .