Service Information

Orlando

Transmission Fluid Pump Assemble - 6T40/45/50

Table 1:	Fluid Pump w/Valve Trains Assemble
Table 2:	Torque Converter Fluid Seal and Fluid Filter Assembly Assemble

Callout

Component Name

A/Trans Fluid Pump Body

Fluid Pump Blow Off Ball Valve Train

Pressure Regulator Valve Train

TCC Blow Off Ball Valve Train

TCC Control Valve Train

Fluid Pump Drive Gear

Tip

•	Align ID feature dots with the driven gear as shown above.

•	The chamfer on the drive gear teeth faces the pump body.

Fluid Pump Driven Gear

Tip

•	Align ID feature dots with the drive gear as shown above, some models.

•	The chamfer on the driven gear O.D. faces the pump body.

Fluid Pump Cover

Fluid Pump Cover Bolts M6 x 25 (Qty: 23)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
12 N·m (106 lb in)

Callout

Component Name

Torque Converter Fluid Seal Assembly

Tip
The fluid seal assembly must be staked in place using DT-49131 seal staking tool to ensure proper seal retention.

•	DT-47792 Seal Installer

•	DT-49131 Seal Staking Tool

For equivalent regional tools, refer to Special Tools .

Torque Converter Fluid Seal

DT-47791-A Seal Installer

For equivalent regional tools, refer to Special Tools .

Torque Converter Fluid Seal Retainer

Fluid Filter Assembly

Tip
Rotate filter 90 degrees to engage locking tabs.