Cause
| Correction
|
Seized accessory drive system component
|
- Remove accessory drive belts.
- Rotate crankshaft by hand at the balancer or flywheel location.
|
Hydraulically locked cylinder
| • | Coolant/antifreeze in cylinder |
|
- Remove spark plugs and check for fluid.
- Inspect for broken head gasket.
- Inspect for cracked engine block or cylinder head.
- Inspect for a sticking fuel injector.
- Inspect for cracked cylinder wall.
|
Seized automatic transmission torque converter
|
- Remove the torque converter bolts.
- Rotate crankshaft by hand at the balancer or flywheel location.
|
Seized manual gearbox
|
- Disengage the clutch.
- Rotate crankshaft by hand at the balancer or flywheel location.
|
Broken timing chain and/or gears
|
| • | Inspect timing chain and gears. |
|
Seized balance shaft
|
|
Material in cylinder
|
| • | Inspect cylinder for damaged components and/or foreign materials. |
| • | Inspect for fallen cylinder wall. |
| • | Repair or replace as required. |
|
Seized crankshaft or big end bearings
|
| • | Inspect crankshaft and big end bearings. |
| • | Inspect for fallen cylinder wall. |
|
Bent or broken connecting rod
|
| • | Inspect connecting rods. |
|
Broken crankshaft
|
|
