Service Information

Orlando

Windscreen Garnish Moulding Replacement

Callout	Component Name
Preliminary Procedures Disable the SIR system. Refer to SIR Disabling and Enabling .
1	Windshield Garnish Molding Procedure Loosen tether clip and steel clips. Disconnect electrical connector. The tether clip at the upper portion of the garnish moulding MUST be replaced any time the garnish moulding is removed.

Callout

Component Name

Disable the SIR system. Refer to SIR Disabling and Enabling .

Windshield Garnish Molding

Loosen tether clip and steel clips.
Disconnect electrical connector.
The tether clip at the upper portion of the garnish moulding MUST be replaced any time the garnish moulding is removed.