To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Radio Scan Tool Information

Table 1: Radio Scan Tool Data Parameters
Table 2: Radio Scan Tool Output Controls

Radio Scan Tool Data Parameters

Parameter

Expected Value

Definition

Operating Conditions: Ignition ON

Aerial Module

Enabled

The scan tool displays Enabled or Disabled. This indicates if the system uses an aerial module and the output status between the radio and the aerial module.

Auxiliary Audio Input

Present

The scan tool displays Present or Not Present. This parameter displays active when an auxiliary input is connected.

Battery Voltage

Varies

The scan tool displays volts. This is the voltage at the input to the radio.

Digital Radio Receiver

Present

The scan tool displays Present or Not Present. This is the state of the Digital Audio Broadcast.

Phone Signal

Present

The scan tool displays Present or Not Present. This parameter will display whether this system uses discrete a phone arbitration or not.

Power Mode

Run

The scan tool displays Off, Accessory, Run or Crank Request. This is the power mode radio.

Rear Seat Audio

Not Present

The scan tool displays Present or Not Present. This parameter displays Present if the system detects a rear seat audio module.

Radio Signal Strength

Varies

This displays the signal strength in dB. This is the signal strength of the radio signal.

Theft Lock Armed

Learned VIN

The scan tool displays Learned VIN or No VIN. This is the state of the VIN programming in the radio.

Radio Theft Lock Status

Inactive

The scan tool displays Active or Inactive. This is the state of the theft lock system.

Valet Mode Status

Inactive

The scan tool displays Active or Inactive. This is the state of the valet mode.

Video Display 1

Inactive

The scan tool displays Active or Inactive. When the rear video display 1 is ON, the scan tool will display Active.

Video Display 2

Inactive

The scan tool displays Active or Inactive. When the rear video display 2 is ON, the scan tool will display Active.

End Model Part Number

Varies

The scan tool displays the end model part number.

Boot Software Part Number

Varies

The scan tool displays the boot software ID number.

Calibration Part Number 1

Varies

The scan tool displays the software module ID 1.

Calibration Part Number 2

Varies

The scan tool displays the software module ID 2.

Calibration Part Number 3

Varies

The scan tool displays the software module ID 3

Calibration Part Number 4

Varies

The scan tool displays the software module ID 4.

Calibration Part Number 5

Varies

The scan tool displays the software module ID 5.

Calibration Part Number 6

Varies

The scan tool displays the software module ID 6.

Calibration Part Number 7

Varies

The scan tool displays the software module ID 7.

Calibration Part Number 8

Varies

The scan tool displays the software module ID 8.

Calibration Part Number 9

Varies

The scan tool displays the software module ID 9.

Calibration Part Number 10

Varies

The scan tool displays the software module ID 10.

Calibration Part Number 11

Varies

The scan tool displays the software module ID 11.

Calibration Part Number 12

Varies

The scan tool displays the software module ID 12.

Calibration Part Number 13

Varies

The scan tool displays the software module ID 13.

Calibration Part Number 14

Varies

The scan tool displays the software module ID 14.

Calibration Part Number 15

Varies

The scan tool displays the software module ID 15.

Calibration Part Number 16

Varies

The scan tool displays the software module ID 16.

Vin Digits 2-17

Varies

The scan tool displays the vin digits 2-17.

Digital Radio Receiver ID

Varies

The scan tool displays the Digital Audio Broadcast receiver ID.

DVD Region Code

Varies

The scan tool displays the DVD region code.

DVD Region Code Changes Remaining

Varies

The scan tool displays the number DVD region code changes remaining.

Radio Scan Tool Output Controls

Scan Tool Output Control

Description

Left Front Speaker

This output control is used to command the speaker ON and OFF. Commanding the speaker ON will generate a test tone to be generated through the selected loudspeaker.

Left Rear Speaker

This output control is used to command the speaker ON and OFF. Commanding the speaker ON will generate a test tone to be generated through the selected loudspeaker.

Right Front Speaker

This output control is used to command the speaker ON and OFF. Commanding the speaker ON will generate a test tone to be generated through the selected loudspeaker.

Right Rear Speaker

This output control is used to command the speaker ON and OFF. Commanding the speaker ON will generate a test tone to be generated through the selected loudspeaker.

Centre Speaker

This output control is used to command the speaker ON and OFF. Commanding the speaker ON will generate a test tone to be generated through the selected loudspeaker.

Subwoofer Speaker

This output control is used to command the speaker ON and OFF. Commanding the speaker ON will generate a test tone to be generated through the selected loudspeaker.

Eject

This output is a reset command to eject the disc.

Info Display/Infotainment Faceplate Reset

This output is a reset command to reset the radio display.

Info Display/Infotainment Faceplate Wakeup

This output commands a wakeup at the display and the faceplate controls.

Clear Hard Disc Drive

This output commands a HDD to clear all customer data. This includes music files, eBooks and navigation addresses. This does not clear Nav database data.

   


© Copyright Chevrolet. All rights reserved
   


© Copyright Chevrolet. All rights reserved