Orlando |
||||||||
|
|
|
|||||||
EN-45000 Remover
For equivalent regional tools, refer to Special Tools .
Caution: Clean the crankshaft sealing surface with a clean, lint-free towel. Inspect lead-in edge of crankshaft for burrs/sharp edges that could damage the rear main oil seal. Remove burrs/sharp edges with crocus cloth before proceeding.
Using the EN-45000 remover (3), remove the crankshaft front oil seal (1) from the crankshaft (2).
| © Copyright Chevrolet. All rights reserved |
| © Copyright Chevrolet. All rights reserved |
