Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the front tyre and wheel assemblies. Refer to Tyre and Wheel Removal and Installation .

1

Stabiliser Shaft Link Nut (Qty: 2)

Warning: Refer to Torque-to-Yield Fastener Warning in the Preface section.

Caution: Refer to Fastener Caution in the Preface section.

Procedure

Install NEW stabiliser shaft link nut. Do NOT reuse old nut.

Tighten
65 N·m (48 lb ft)

2

Stabiliser Shaft Link