Orlando

Input Speed Sensor Replacement

1. Remove the control valve body. Refer to Control Valve Body Replacement .



2. Remove the input speed sensor bolt (2) M6 x 23.
3. Unlock the 2 retaining tabs inside the transmission housing.
4. Remove the input speed sensor (3).
5. Remove the 3 input speed sensor seals (1).

1. Install the 3 input speed sensor seals (1).
2. Install the input speed sensor (3).
3. Verify that the retaining tabs are locked completely.

Caution: Refer to Fastener Caution in the Preface section.

4. Install the input speed sensor bolt (2) M6 x 23 and tighten to 9 N·m (80 lb in).
5. Install the control valve body. Refer to Control Valve Body Replacement .
6. Perform the transmission adaptive values learn procedure. Refer to Transmission Adaptive Values Learn .