To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Selector and Gear Shift Lever Cable Bracket Replacement

Removal Procedure
  1. Remove battery tray. Refer to Battery Tray Replacement .

    2. 2191414
  2. Remove shift lever and selector lever cable (2) from transmission control housing (3).
  3. Remove gear lever and selector lever cable from gear lever and selector lever cable bracket (1).

    4. 2191518
  4. Remove 2 gear shift lever and selector lever cable bracket nuts (2).
  5. Remove gear shift lever and selector lever cable bracket (1).

Installation Procedure

    2191518
  1. Install gear shift lever and selector lever cable bracket (1).

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install 2 gear shift lever and selector lever cable bracket nuts (2) and tighten to 20 N·m (15 lb ft).

    3. 2191414
  3. Install gear lever and selector lever cable (2) to gear lever and selector lever cable bracket (1).
  4. Install gear lever and selector lever cable to transmission control housing (3).
  5. Install battery tray. Refer to Battery Tray Replacement .
   


© Copyright Chevrolet. All rights reserved
   


© Copyright Chevrolet. All rights reserved