To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Forward Lamp Wiring Harness Replacement


2372667

Callout

Component Name

Preliminary Procedures

  1. Remove the front bumper fascia. Refer to Front Bumper Fascia Removal and Installation .
  2. Remove the front compartment fuse block housing. Refer to Front Compartment Fuse Block Housing Replacement .
  3. Remove battery tray. Refer to Battery Tray Replacement .
  4. Remove the air inlet grille. Refer to Air Inlet Grille Panel Replacement .
  5. Loosen the front wheelhouse liners. Refer to Front Wheelhouse Liner Replacement .
  6. Using a scan tool, check for DTCs.

1

Forward Lamp Wiring Harness

Tip

    • Create a work area large enough to lay out the new and old wiring harnesses.
    • Use care when removing inaccessible harness retainers. Replacement retainers may not be available.
    •  Compare the new and old wiring harnesses for the same part number, the same number of wiring harness connectors, the same pin settings, and the same harness retainers.
    • Follow a logical order of steps during the replacement to ensure proper installation of the harness.
   


© Copyright Chevrolet. All rights reserved
   


© Copyright Chevrolet. All rights reserved