Service Information

Orlando

Body Wiring Harness Replacement

Callout

Component Name

Using a scan tool, check for DTCs.
Remove front compartment fuse block housing. Refer to Front Compartment Fuse Block Housing Replacement .
Remove front floor panel carpet. Refer to Front Floor Panel Carpet Replacement .
Remove instrument panel assembly. Refer to Instrument Panel Assembly Replacement .
Remove brake, accelerator, and clutch pedal. Refer to Brake, Accelerator, and Clutch Pedal Replacement : Left Hand Drive .
Remove body side trim panel -- left hand side. Refer to Body Side Trim Panel Replacement - Left Hand Side .
Remove body side trim panel -- right hand side. Refer to Body Side Trim Panel Replacement - Right Hand Side .

Body Wiring Harness

Caution: Refer to Fastener Caution in the Preface section.

Using a scan tool, check for DTCs.

Tip

•	Take photos of original wiring harness routing for correct re-installation.

•	Create a work area large enough to lay out the new and old wiring harnesses.

•	Use care when removing inaccessible harness retainers. Replacement retainers may not be available.

•	Compare the new and old wiring harnesses for the same part number, the same number of wiring harness connectors, the same pin settings, and the same harness retainers.

•	Follow a logical order of steps during the replacement to ensure proper installation of the harness.