Orlando

Exhaust Camshaft Removal

Special Tools

EN-50433 Adaptor - Exhaust Camshaft Sprocket Fixing

For equivalent regional tools, refer to Special Tools .

1. Set crankshaft 90° beyond TDC of combustion stroke of cylinder 1. The arrows on the camshaft sprockets must align as shown (1).
2. Fix the exhaust camshaft sprocket with the EN-50433 sprocket fixing (2).




Caution: Use extreme care when removing the camshaft not to nick, scratch, or damage the camshaft lobes or bearing surfaces.

Note: Remove the camshaft seat guide cap from cylinder 2 at least. Set the camshaft guides aside in order as removed.

3. Remove the 4 camshaft seat guide cap retaining bolts (2).
4. Remove the camshaft seat guide cap (1).
5. Remove the 8 camshaft seat guide cap retaining bolts (3).
6. Remove the 4 camshaft seat guide caps.
7. Remove the exhaust camshaft (4).