Orlando |
||||||||
|
|
Illustration | Tool Number/ Description |
---|---|
| EN-135 Adapter |
| EN-470-B KM-470-B EN-45059 DW260-030-01, DW260-030-02 Torque Angular Gauge |
| EN-498-B KM-498-B Oil Pressure Gauge |
| GE-571-B MKM-571-B Dial Gauge |
| CH-807 KM-807 Closure Plugs |
| CH-904 KM-904 Base Frame |
| EN-6015 KM-6015 Closure Plugs |
| EN-8087 J-8087 Cylinder Gauge |
| EN-45000 KM-J-45000 J-45000 Remover |
| EN-46116 Valve Stem Seal Remover/Installer |
| EN-46569 Valve Spring Compressor |
| EN-47632 Cleaner |
| EN-47649 J-28467 DW110-080 Engine Bridge |
| EN-47650 Retainer Frame |
| EN-47650-030 Extension |
| EN-47650-050 Mounting Rail |
| EN-47650-250 Front Adapter |
| EN-47650-300 Adapter |
| EN-48247 Valve Spring Compression Adapter |
| EN-48248 Cylinder Compression Pressure Gauge |
| EN-48251 Crankshaft Rear Oil Seal Installer |
| EN-48259 Oxygen Sensor Remover |
| EN-48952 Drive Belt Tensioner Holding Pin |
| EN-49073 Timing Chain Tensioner Pin |
| EN-49074 Universal Valve Spring Compressor |
| CH-49289 Centring Adapter |
| CH-49290 Mounting Engine / Transmission |
| EN-50057 Engine Overhaul Stand |
| EN-50207 Oil Pressure Switch Adaptor |
| EN-50425 Piston Ring Compressor |
| EN-50427 Crankshaft Front Oil Seal Installer |
| EN-50428 Injector Remover |
| EN-50429 Exhaust Temperature Sensor Remove/Install Adaptor |
| EN-50430 Balance Shaft Module Locking Pin |
| EN-50431 BSM Backlash Measure Adaptor |
| EN-50432 Flywheel Fixing Adaptor |
| EN-50433 Exhaust Camshaft Sprocket Fixing Adaptor |
| EN-50434 Dust Fuel Rail Port Cap |
| EN-50435 Guide Pin |
| EN-50436 Crankshaft Pulley Bolt Remover |
| EN-50437 Piston TDC Height Gauge |
| EN-50453 Air Compression Adaptor |
| EN-50454 Cylinder Pressure Gauge |
| EN-50457 Fuel Pressure Gauge |
| EN-50517 Fuel Pressure Gauge Adapter |
© Copyright Chevrolet. All rights reserved |
© Copyright Chevrolet. All rights reserved |