Orlando

Crankshaft Position Sensor Replacement

1. Remove the front compartment insulator. Refer to Front Compartment Insulator Replacement .
2. Disconnect the crankshaft position sensor wiring harness plug.



3. Remove the crankshaft position sensor bolt (2).
4. Remove the crankshaft position sensor (1).

1. Install the crankshaft position sensor (1).

Caution: Refer to Fastener Caution in the Preface section.

2. Install the crankshaft position sensor bolt (2) and tighten to 10 N·m (89 lb in).
3. Connect the crankshaft position sensor wiring harness plug.
4. Install the front compartment insulator. Refer to Front Compartment Insulator Replacement .