Orlando

Fuel Injection Fuel Rail Assembly Replacement

Special Tools

EN-50434 Dust Cap - Fuel Rail Port

For equivalent regional tools, refer to Special Tools .

1. Remove the engine sight shield. Refer to Engine Sight Shield Replacement .
2. Remove the fuel injection fuel feed pipe - fuel injection pump to fuel rail. Refer to Fuel Injection Fuel Feed Pipe Replacement - Fuel Injection Pump to Fuel Rail .
3. Remove the fuel injection fuel feed pipe - fuel rail to fuel injector. Refer to Fuel Injection Fuel Feed Pipe Replacement - Fuel Rail to Fuel Injector .
4. Close all connections with the EN-50434 plugs .



5. Remove the 2 fuel injection fuel rail retaining bolts (1).
6. Remove the fuel injection fuel rail (2).

1. Install the fuel injection fuel rail (2).

Caution: Refer to Fastener Caution in the Preface section.

2. Install 2 fuel injection fuel rail retaining bolts and tighten to 25 N·m (18 lb ft).
3. Remove the EN-50434 plugs .
4. Install the fuel injection fuel feed pipe - fuel rail to fuel injector. Refer to Fuel Injection Fuel Feed Pipe Replacement - Fuel Rail to Fuel Injector .
5. Install the fuel injection fuel feed pipe - fuel injection pump to fuel rail. Refer to Fuel Injection Fuel Feed Pipe Replacement - Fuel Injection Pump to Fuel Rail .
6. Install the engine sight shield. Refer to Engine Sight Shield Replacement .